Oki B930dn User Manual

B930n User’s Guide> 112
9. Lift the printer and move it gently. If the printer is to be
moved over a long distance, pack it inside a box.
F USER U NIT
This section explains the Fuser unit replacement.
C AUTION ON H ANDLING THE F USER U NIT
The fuser unit is included as one of the regular replacement parts.
Before replacing the fuser unit, open the box of the regular
replacement parts and get the new fuser unit ready.
When handling the fuser unit, take note of the following
CAUTION
> Never touch a labelled area found on or near the heat
roller. You can get burned. If a sheet of paper is
wrapped around the heat roller, do not try to remove it
by yourself to avoid injuries or burns. Switch off the
machine immediately, and contact your service
provider. Be sure to switch off and unplug the machine
before accessing the interior of the machine for
cleaning, maintenance, or fault clearance. Access to a
live machine’s interior can cause electric shock.
R EPLACING THE F USER U NIT
1. Switch off the power of the printer and leave it for 30
minutes until the fuser unit cools down.

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.