43827101TH Rev.2 113 /
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
The adjustment of this printer can be implemented using the maintenance utility and also by key
input through the operator panel.
This printer provides maintenance menus, apart from the normal menus. Select the menu that best
suits the purpose of your intended adjustment.
Used to set the destination.
JPOEM1: Japan OEM
OEMA: Overseas OEM for A4 default
OEML: Overseas OEM for Letter
default
When the menu is dismissed, the
printer is automatically rebooted.
Default is OEL.
Initializes the HDD.
When this item is executed, the menu
is dismissed, and initialization of the
HDD begins. [Display conditions]
* HDD mounted ("ADMIN MENU,"
"BLOCK DEV MENU" and "INITIAL
LOCK" are YES, and "ADMIN MENU,"
"FILE SYS MAINTE," and "HDD" are
"ENABLE.")
Initializes the Flash ROM.
When this item is executed, the menu
is dismissed, and formatting of the
flash device mounted in the Resident
(Onboard) begins. (CAUTION! NIC
F/W will be erased.see section 7.5.4)
Resets the EEPROM contents to the
factory defaults. After the settings
have been changed, the printer is
automatically rebooted.
* Certain special items are not
initialized.
Function
ENTER
PASSWORD
OKIUSER
HDD FORMAT
(C6150/C6050/
)
FLASH FORMAT
MENU RESET
Item(1st Line)
xxxxxxxxxxxxxxx
ODA
OEL
APS
JP1
JPOEM1
OEMA
OEML
EXECUTE
EXECUTE
EXECUTE
Value(2nd Line)
000
000
*
-
-
-
DF
SYSTEM MAINTE
OKIUSER
MAINTENANCE
MENU
Category
5.1 System maintenance menu (For maintenance personnel)
This menu is activated when the power is turned with the MENU+ and MENU- keys held down.
The menu indications are given in English only, irrespective of the destination of the printer.
Note!
Since this menu is likely to be changed depending on the destination or for other
reason, it is not disclosed to the end users.
Table 5-1. Maintenance menu indication table (1/3)
To Next Page
Loading...
