Oki C5650 - Print Jobs Menu

43827101TH Rev.2 67 /
Oki Data CONFIDENTIAL
Media type *
1
Media weight
55-64kg (64-74g/m
2
)
65-89kg (75-104g/m
2
)
90-103kg (105-120g/m
2
)
104-172kg (121-200g/m
2
)
-
-
Less than 0.1-0.17mm
0.17-0.2mm
-
WeightTypes
Setting *
2
for
[Media weight] of the
printer driver
Light
Medium
Heavy
Ultra heavy
-
-
Label paper 1
Label paper 2
Transparency
film
Light
-
-
Label paper
Transparency
film
Setting values of the operation
panel
Light
Medium
Heavy
Ultra heavy
-
-
Thicker paper
Thickest paper
-
Regular
paper*
3
Postcard*
4
Envelope*
4
Label paper
Transparency
*
5
film
3.8 Confirmation of paper used by the user
Load the media used by the user in the printer, make Media Type/Weight settings, execute the
Menu Map/Demo print, and check to make sure that the printouts are free from toner flaking.
*1: The printer comes with Media Type set to [Light] at the factory.
*2: The thickness and type of paper can be set on the operator panel and also via the printer
driver. If those parametersare set via the printer driver, the settings of the printer driver will
have priority. If [Auto selectio] is selected in [Feed Trey] of the printer driver, or [Printer
setting] is selected in [Media weight] , the print will take place with the settings made on
the operator panel.
*3: The paper thickness with which two-sided print can be conducted is from 65 to 90kg (75
to 105g/m
2
) of ream weight.
*4: For postcards and envelopes, there is no setting of Media Weight or Media Type.
*5: For OHP sheets, Media Type only is set. There is no need to make setting in Media Weight.
Memo If [Heavy] or [Ultra heavy] is selected in Media Weight, or [Label paper] or [OHP] in
Media Type, the print speed will be affected.