43827101TH Rev.2 154 /
Oki Data CONFIDENTIAL
5.3.3 Various types of print on the individual printer equipped with controller
Menu Map Printing
Information on the program versions, controller configuration, network settings, etc., is printed.
Operation:
1 Press the MENU+ key several times to cause “INFORMATION MENU” to be displayed.
2 Press the ENTER key to cause “PRINT MENUMAP/EXECUTE” to be displayed.
3 Press the ENTER key.
Or, press and hold down for two seconds or longer the push switch above the network connector
on the back of the printer main unit.
Demonstration print
The demonstration patterns for different destinations that are built in the ROM are printed.
Operation:
1 Press the MENU+ key several times to cause “INFORMATION MENU” to be displayed.
2 Press the ENTER key.
3 Press the MENU+ key several times to cause “DEMO1/EXECUTE” to be displayed.
4 Press the ENTER key.
5.3.4 Functions of keys when depressed at power-on
The different keys provide the following functions when the power is turned on to the printer. The
following keys turn effective when pressed and held down, until "RAM CHECK" is displayed in the
upper line of the LCD, and three to four asterisks "*" in the lower line.
(1) MENU+ key & MENU- key & ENTER key
These keys start the printer in the CU program update mode. When the printer is started in this
mode, the network does not work, since the DLM function turns ineffective.
(2) BACK key & ONLINE key & CANCEL key
These keys launch the CU program without activating the objects which were added in the
download mode, etc.
(3) MENU+ key & MENU- key
These keys launch the system maintenance menu.
(4) BACK key & MENU key & ENTER key
These keys start the printer in the mode in which it remains permanently ONLINE, in disregard
of warnings/errors (Factory-support function).
(5) ONLINE key
This key starts the printer in the dedicated mode in which objects, such as network, USB, etc.,
are downloaded.
(6) ENTER key
This key launches the Admin menu.
To Next Page
Loading...
