Oki Data CONFIDENTIAL
43827101TH Rev.2 161 /
6. PERIODICAL MAINTENANCE
6.1 Recommended replacement parts
Oki Data recommends that heavy users only replace the following parts. (If those parts are not
replaced, the print quality is not guaranteed, and malfunctions may even result.)
Parts are replaced periodically by users.
6.2 Cleaning
Clean the interior and outside of the printer, as needed, using a waste cloth and small vacuum
cleaner (hand cleaner).
Note!
Be careful not to touch the image drum terminals, LED lens array and LED head connectors.
6.3 Cleaning of LED lens array
If a vertical white band or white stripe (partial print, light print) is observed in the print face, clean
the LED lens array.
Note!
To clean the LED lens array, be sure to use the LED head cleaner.
(The LED head cleaner is supplied in the same package of the toner cartridge.)
White band, white stripe
(Void or light printing)
Note!
1. Consumable parts (Image drums, toner cartridge, fuser unit, belt unit) are not included.
2. Power supply, PU PCB, CU PCB and other PCBs are not included.
Part Name
Friction Pad Assy
Roller Assy. Hopping
C6050/C6150
42088801
43334901
C5650
<--
<--
To Next Page
Loading...
