43827101TH Rev.2 73 /
Oki Data CONFIDENTIAL
4.2.4 Rear cover
(1) Open the face-up tray.
(2) Remove two screws (silver) 1.
(3) Insert the flat-tipped screwdriver into hole A, as illustrated in Figure (2), and release two claws
A.
(4) Now, release two claws B, and pull the upper part of rear cover 2 in the direction of arrow
A.
(5) Push the lower part of rear cover 2 in the direction of arrow B, as shown in Figure (3), and
detach rear cover 2 by freeing three claws C.
Figure 4-2-4 Rear Cover
2
1
2
1
A
A
B
Figure (3)
Figure (2)
Figure (1)
ClawC
ClawC
ClawA
ClawA
ClawB
ClawB
HoleA
HoleA