Oki C5650 - Fuser Replacement Procedure

43827101TH Rev.2 92 /
Oki Data CONFIDENTIAL
4.2.19 Shaft Eject Assy(FU) / Shaft Eject Assy(FD) / Eject Sensor
(1) Remove the eject Assy. (See Subsection 4.2.13.)
(2) Free the two claws, and divide the Assy between guide into lower 1 and guide eject upper
2.
(3) Remove gear idle eject 3, and disassemble shaft Assy eject (FU) 4 and shaft Assy eject (FD)
5 and Gear eject 6.
(4) Remove lever eject sensor 7 and eject sensor 8.
Figure 4.2.19 Shaft Eject Assy(FU) / Shaft Eject Assy(FD) / Eject Sensor
2
1
8
3
7
4
5
6
Claws