43827101TH Rev.2 53 /
Oki Data CONFIDENTIAL
Remove Side Cover
1) Loosen the screw (1).
2) Remove the side cover.
To remove the side cover, slide it while holding up its upper part.
Installing the memory
On the C6150/C6050
1) Before taking the memory out of the bag, place the bag in contact with a metal part to
fuser eliminate its static electricity.
2) Insert the memory into the idle slot.
3) Ensure that it is securely fastened by the right and left lock levers.
Note!
• Do not touch the electronic parts and connector pins.
• Pay attention to the orientation of the memory. The terminal part of the memory has a
notch, which is designed to engage with the connector of the slot.
2
1
Top cover
Front cover
Screw
Side cover
To Next Page
Loading...
