43827101TH Rev.2 43 /
Oki Data CONFIDENTIAL
3.5 Assembling method
3.5.1 Assembly of printer main body
Removing the protective materials
1) Peel off the protective tapes (5) and the slip of paper from the front part of the printer,
and also peel off the protective tapes (2) from the back of the printer.
2) Draw out the paper cassette.
3) Pull out the retainer forward.
4) Open the top cover by pressing the OPEN button.
5) Detach the stopper release (Orange) while pressing down the lever (Blue) of the fuser unit
in the direction of arrow 1.
Note!
Instruct the user of the printer to be sure to keep the stopper release, which is used for
transporting the printer, at hand.
Slip of paper
Protective Tape
Protective Tape
OPEN button
Paper cassette
Retainer
2
1
2
1
Stopper release (Orange)
Lever (Blue) of fuser unit
To Next Page
Loading...
