Oki C5650 - 5) Cyclic Print Trouble (Refer to Fig.7.2 E ); Cyclic Print Trouble (Refer to Fig.7.2 E ); Vertical Cyclic Print Trouble

Oki Data CONFIDENTIAL
43827101TH Rev.2 227 /
7.5.3.(5) Cyclic Print Trouble (Refer to Fig.7.2 E )
(5-1)Vertical cyclic print trouble
Image drum
Development roller
Toner supply roller
Charging roller
Roller on the fuser unit
Transfer roller (Black)
Transfer roller (Color)
Confirmation Items
(5-1-1) Periodicity
Confirmation Tasks
Check to see if the periodicity is 94.25 mm or not.
Check to see if the periodicity is 39.68 mm or not.
Check to see if the periodicity is 58.36 mm or not.
Check to see if the periodicity is 37.7 mm or not.
Check to see if the periodicity is 86.39 mm or not.
Check to see if the periodicity is 50.27 mm or not.
Check to see if the periodicity is 43.98 mm or not.
Action at NG
Replace the ID unit.
Replace the ID unit.
Replace the ID unit.
Replace the ID unit.
Replace the fuser unit.
Replace the belt unit.
Replace the belt unit.
To use a new
consumable part on a
trial basis, use FUSE
KEEP MODE of the
System Maintenance
Menu.