43827101TH Rev.2 119 /
Oki Data CONFIDENTIAL
Table 5-2 Maintenance Utility Adjustment Items (3/3)
Operation on
Operator Panel
(Section No. corresponds to
the Maintenance manual)
Item
Section No. of the
Maintenance Utility
Operation
Adjustment
27
28
29
30
Prohibited to use
Subsect.5.3.2.8
Subsect. 5.3.2.9
Subsect. 5.3.2.10
Subsect. 5.3.2.11
Automatic density
correction control
parameter setup
[Prohibited to use]
Counter indication
Local parameter
setup
Engine parameter
setting
Prohibited to use
Subsect. 2.4.1.5.7
Subsect. 2.4.1.5.8
Subsect. 2.4.1.5.9
Setup of automatic density setting control
parameters.
Verification of the counters for consumable
parts, continuance of consumable parts and
waste toner.
Verification of the switching between Factory
mode and Shipping mode, and the state of
Fuse.
Verification of the switching between Factory
mode and Shipping mode, and the state of
Fuse.
*1: With functional limitation
Note!
Items [Prohibited to use] must not be operated/set. There is a risk of abnormal operation
of the printer.
To Next Page
Loading...
