Oki Data CONFIDENTIAL
43827101TH Rev.2 165 /
(4) Take out the fuser unit.
The fuser unit is extremely hot. Be careful not to touch it. If the fuser
unit is hot, do not try yourself to clear paper but wait until the fuser
unit becomes cool.
Personal injuries may occur.
1. Raise the fuser unit lock levers (2, blue) in the direction of the arrow.
2. Take out the fuser unit holding it by the handle.
Fuser unit
locking lever
(blue)
Handle
Fuser unit
locking lever
(blue)
(5) Wipe the metal shaft using the LED lens cleaner, a soft cloth or tissue paper.
Shaft
(6) Install the fuser unit back in place.
For details, see "Replacing the fuser unit" in Setup Part of the User's Manual.
(7) Put the four image drum cartridges gently back in the printer.
(8) Close the top cover.
To Next Page
Loading...
