Oki C5650 - Page 168

Oki Data CONFIDENTIAL
43827101TH Rev.2 168 /
Table 7-1-1 Operator Alarm (2/9)
Description
Code
nnn
Display on Operator Panel
Ready
LED
Attention
LED
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE% AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY% SIZE
MISMATCH
LOAD %MEDIA_SIZE%/
%MEDIA_TYPE% AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY% SIZE
MISMATCH
DOWNLOAD MESSAGE
PROCESSING
DOWNLOAD MESSAGE
WRITING
DOWNLOAD MESSAGE
SUCCESS
DOWNLOAD MESSAGE
FAILED %CODE%
NETWORK CONFIG
WRITING
WAIT A MOMENT
NETWORK INITIAL
Off
Off
Varies
Varies
Varies
Varies
Varies
Varies
Blink
Blink
Varies
Varies
Varies
Varies
Varies
Varies
The size of paper or media type in the tray does not
match the print data.
Load paper in tray
(It takes a while until the status disappears after you
have closed the tray and the lever lifted.)
Error 461 : Tray1
Error 462 : Ttay2
The paper size displaying form of the custom mode is
the same as above.
As a user pressed ONLINE key, the printer could ignore
this error at the just printing job.
The size of paper or media type in the tray does not
match the print data.
Load paper in tray
(It takes a while until the status disappears after you
have closed the tray and the lever lifted.)
Error 460 : MPTray
The paper size displaying form of the custom mode is
the same as above.
A user needs to press ONLINE key after changing the
paper.
Indicates that message data to be updated is being
processed.
Indicates that message data to be updated is being
written.
Indicates that message data to be updated has been
written successfully.
Indicates that writing of message data to be uploaded
has been failed.
%CODE% is a decimal value (one digit) and represents
the cause of failure in writing.
= 1 ··· Unknown: Cause of failure unknown
= 2 ··· DATA_ERROR: Hash check error in data reading/
writing, or abnormal FLASH
= 3 ··· OVERFLOW: Downloading failure due to FLASH
memory full at starting or during writing in a language file
= 4 ··· MEMORYFULL: Memory reservation failure
= 5 ··· UNSUPPORTED_DATA: Downloading data
unsupported on the printer
This appears during the NIC configuration data is storing
into the flash memory, as the setting was changed.
This appears when the NIC initialization is occurred, as
the setting was changed.
Error
461
462
Error
460
Error
Error
Error
Error
Error
Error