Oki Data CONFIDENTIAL
43827101TH Rev.2 170 /
Description
Code
nnn
Display on Operator Panel
Ready
LED
Attention
LED
Table 7-1-1 Operator Alarm (4/9)
PROTEC PAPER
%ERRCODE%:ERROR
TRUST PAPER
%ERRCODE%:ERROR
TRUST PAPER
%ERRCODE%:ERROR
TRUST PAPER
%ERRCODE%:ERROR
PROTEC PAPER
%ERRCODE%:ERROR
PROTEC PAPER
%ERRCODE%:ERROR
REPLACE TONER
%ERRCODE%:%COLOR% WASTE
TONER FULL
REPLACE TONER
%ERRCODE%:%COLOR% TONER
EMPTY
Off
Off
Off
Off
Off
Off
Off
Off
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Blink
Density of the destination image for a woven pattern is
greater than that of the woven pattern. A user must take
measures such as increasing density of the woven pattern or
decreasing density of the input image.
Displays a warning on the operation panel as waiting for key
press. Does not print the job that is being processed. (The same
operation as job reset) (C6150/C6050
This error occurs when capacity of specified information to be
embedded exceeds the capacity that can be embedded in
the woven pattern. A printing operator must reduce data to be
embedded in the woven pattern.
Displays a warning on the operation panel as waiting for key
press. Does not print the job that is being processed. (The same
operation as job reset) (C6150/C6050)
Density of the destination image for woven pattern is greater
than that of the woven pattern. A user must take measures
such as increasing density of the woven pattern or
decreasing density of the input image.
Displays a warning on the operation panel as waiting for key
press. Does not print the job that is being processed. (The same
operation as job reset) (C6150/C6050)
The area specified for tampering verification is incorrect.
This error occurs when an image is pushed away or the
unprintable area is specified. (C6150/C6050/)
Size of information to be embedded is greater than paper
size. It is required to reduce information to be embedded or
increase print paper size to make prints.
(C6150/C6050)
NTP server setting is not correct. Print JOB is canceled
because it judged that the correct time is impossible to enter.
Users need to change the setting of NT server.
(C6150/C6050)
Indicates that a waste toner box represented by %COLOR%
has become full and needs to be replaced.
Error 414 : Y
Error 415 : M
Error 416 : C
(Does not occur for K.)
Warning status takes effect at Cover Open/Close and printing
of about 50 copies becomes available.
Toner ends.
Error 410 : Y
Error 411 : M
Error 412 : C
Error 413 : K
Warning status takes effect at Cover Open/Close.
Error
422
Error
423
Error
424
Error
425
Error
426
Error
427
Error
414
415
416
Error
410
411
412
413
To Next Page
Loading...
