43827101TH Rev.2 55 /
Oki Data CONFIDENTIAL
(2) Installation of second tray unit
This tray is intended to increase the amount of paper that can be loaded in the printer. It holds
530 sheets of 70kg ream weight paper, allowing to print 930 sheets continuously when
combined with the standard paper cassette and multi-purpose tray.
Turning OFF the printer power and disconnecting the power cord
Note!
If an expansion memory is installed with the power switched ON, the printer may be
broken.
Placing the printer on the second tray unit.
Note!
The printer weighs Approx. 29kg (with Duplex)/Approx. 26kg (w/o Duplex). It should be
lifted up by two or more persons.
1) Align the holes in the bottom of the printer to the protrusions of the second tray unit.
2) Place the printer gently on the second tray unit.
To detach the second tray unit, follow the same procedure inversely.
OI
Holes in the printer bottom
Protrusions
To Next Page
Loading...
