43827101TH Rev.2 59 /
Oki Data CONFIDENTIAL
Detaching the side cover
1) Loosen the screw (1).
2) Remove the side cover.
To remove the side cover, slide it while holding up its upper part.
Memo
If you have difficult detaching the side cover, check to see if the front cover is open.
Installing the built-in type hard disk
1) Insert part "a" of the built-in type hard disk into hole "b" of the printer main body, and align
the positions of the screw holes.
2) Install the two screws.
3) Push in the connector, until it snags in there with a click.
2
1
Top cover
Front cover
Screw
Side cover
Multi-purpose tray
Front cover
b
a
Connector
Hard disk
To Next Page
Loading...
