Oki C710 - Page 139

43856301TH Rev.3
138 /
Oki Data CONFIDENTIAL
7. Troubleshooting and repair procedure
Display on operator panel
ON
LINE
lamp
Inspection
lamp
Contents Code nnn
Wait for a while. Network
initialization is in progress.
Varies Varies Indicates the network initialization is
in progress.
Error
(ONLINE)
Insert %MEDIA_SIZE%
%ERRCODE%: The
%TRAY% runs out of
paper.
Off Blink Indicates that a print request is
issued to the tray that has run out of
paper. Prompting user to refill paper.
Error 491:
Tray 1
Error 492:
Tray 2
Unit of paper size in the Custom
mode follows the unit specified by
menu unless otherwise specified by
driver. If unit of paper size is specified
by driver, it is displayed in units
specified by driver.
Error
491
492
Insert the
%MEDIA_SIZE% and
press the ON LINE switch.
%ERRCODE%: The MP
tray runs out of paper.
Off Blink Indicates that a print request is
issued to the multipurpose tray that
has run out of paper.
Paper feed restarts when user
pressed the ON LINE switch.
Error 490:
Multipurpose tray
Unit of paper size in the Custom
mode follows the unit specified by
menu unless otherwise specified by
driver. If unit of paper size is specified
by driver, it is displayed in units
specified by driver.
This error occurs when the tray is in
the home position, and the sensor
"PE SENS 2" cannot detect paper.
Error
490
Insert a cassette.
%ERRCODE%: Tray 1 is
left blank.
Off Blink Indicates that cassette is removed
from the tray 1 that is located in
the path when a print from tray 2 is
attempted.
Error
440
Insert a cassette.
%ERRCODE%: The
%TRAY% is not installed.
Off Blink Indicates that paper feeding is not
possible because cassette has been
removed from the corresponding
tray when a print from the tray is
attempted.
Error
430
Display on operator panel
ON
LINE
lamp
Inspection
lamp
Contents Code nnn
Add memory.
%ERRCODE%: Memory
overflow
Off Blink Indicates the data overflow exceeding
the memory free space due to the
following reasons. The processing is
continued when the ON LINE switch
is pressed.
Install the add-on RAM or decrease
amount of data.
Cause of the trouble is that the
following phenomenon has occurred.
Amount of print data within a single
page is too many.
Error
420
Change the toner.
%ERRCODE%: The
%COLOR% waste toner is
full.
Off Blink Indicates that the waster toner
of %COLOR% is full requiring
replacement of toner.
Error 414:
Y
Error 415:
M
Error 416: C
(This error does not occur in the
black toner.)
When the cover is opened/closed,
it changes to the warning status
making possible to perform printing
of approx 50 copies.
Error
414
415
416
Replace the toner.
%ERRCODE%: The
%COLOR% runs out of
toner
Off Blink Indicates that the printer runs out of
toner.
When the cover is opened/closed, it
changes to the warning status.
Error 410: Y
Error 411: M
Error 412: C
Error 413: K
Error
410
411
412
413
Replace the toner.
%ERRCODE%: The
%COLOR% toner is illegal.
Off Blink Indicates the toner cartridge is not for
use in the printer.
The printer recovers from the error
after replacement of the toner
cartridge with a toner cartridge for
the printer.
Error 554: Y
Error 555: M
Error 556: C
Error 557: K
Error
554
555
556
557