- 47 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
5
Close the toner replacement cover.
Remove the image drum stopper
Memo
The image drum is set inside the device at the factory.
Reference
For the methods of replacing the image drum, see
"Troubleshooting/Daily Maintenance Manual", or the device
help.
The stopper is mounted to the image drum in
the device at the factory.
Make sure to use the following procedure to
remove the stopper before use.
1
Open the front cover.
2
Gently raise the (blue) lever ( ), and
remove the image drum (
) while
being careful not to touch the green
cylinder with your hands.
Note
Be careful not to touch or scratch the image drum
(green cylinder).
To Next Page
Loading...
Need help?
General
