Scanning With the Machine 6-19
6 Press the or key to select FINISH, and then press the ENTER key.
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB
address) can be deleted.
" Changes made with this procedure will not be applied to the original
data (speed dial destination, group dial destination, etc.).
1 In the main screen (Scan mode), press the or key to select the current
data destination setting, and then press the ENTER key.
2 To delete an e-mail address, press the or key to select CHECK/EDIT,
and then press the ENTER key. Then, press the or key to select the
address to be deleted. To delete an FTP address or SMB address, con-
tinue with step 3.
3 Press the STOP/RESET key.
4 Press the or key to select YES, and then press the ENTER key.
The selected address is deleted.
" If all specified addresses are deleted, the main screen is dis-
played.
5 To delete another address, repeat the procedure from step 2.
6 To finish deleting addresses, press the BACK key.
7 Press the or key to select FINISH, and then press the ENTER key.
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as speed dial destina-
tions or as group dial destinations.
" The same settings menu used to register/edit fax numbers is used to
register/edit addresses. For details on registering/editing fax numbers,
refer to the Facsimile User’s Guide on the CD.
To Next Page
Loading...
