Configuration Menu Overview 2-51
REPORTING Menu
" Manufacturer’s default settings appear in bold.
REPORTING ACTIVITY REPORT
TX RESULT REPORT
RX RESULT REPORT
ACTIVITY
REPORT
Setting
OFF / ON
After every 60 transmissions/receptions, a report can
be printed to show the results of the transmissions/
receptions. Select whether the report is printed auto-
matically when the 60th transmission/reception is
reached.
TX RESULT
REPORT
Setting
ON / ON(ERROR) / OFF
Select whether the report showing the result of a trans-
mission is printed automatically after the transmission
is finished.
ON: Prints the report after each transmission.
ON(ERROR): Prints the report after a transmission
only if an error occurred.
OFF: Does not print the report after each transmission,
even if an error has occurred.
The transmission result report is normally printed after
a broadcast transmission.
To Next Page
Loading...
