Scanning With the Machine 6-21
5 Press the or key to select the address to be deleted from the favorite
list, and then press the STOP/RESET key.
6 Press the or key to select YES, and then press ENTER key.
The selected address is deleted.
7 To delete another address, repeat the procedure from step 5.
8 To finish deleting addresses, press the BACK key.
9 Press the or key to select FINISH, and then press the ENTER key.
Registering Speed Dial Destinations (Direct Input)
E-mail addresses can be registered as speed dial destinations. A maximum
of 250 speed dial destinations can be registered.
" Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with the Setup Utility.
" Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from the Setup Utility.
1 In the main screen (Scan mode), press the or key to select UTIL-
ITY
, and then press the ENTER key.
2 Press the or key to select DIAL REGISTER, and then press the
ENTER key.
3 Press the or key to select SPEED DIAL, and then press the ENTER
key.
4 Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the E
NTER key.
5 Press the or key to select MANUAL SETTING, and then press the
E
NTER key.
" If an LDAP server is not specified, step 5 is skipped.
6 Use the keypad to type in the registration name, and then press the
E
NTER key.
" For details on entering/editing text, refer to “Entering Text” on
page A-6.
" A maximum of 20 characters can be entered.
7 Use the keypad to type in the e-mail address, and then press the ENTER
key.
The settings are registered, and the DIAL REGISTER menu appears
again.
To Next Page
Loading...
Need help?
General
