Configuration Menu Overview 2-47
DEFAULT TX
Setting
MEMORY TX / DIRECT TX
Select the desired method for sending documents.
MEMORY TX: With this method, the fax transmission
starts after the entire document is scanned and stored
in the memory. The total number of pages is automati-
cally printed with the page number in the header. How-
ever, the memory may become full if there are many
pages in the document or if the data is large due to the
fine image quality (resolution).
DIRECT TX: With this method, the transmission is
performed in real time in the transmission sequence of
the destinations. If there are many pages in the docu-
ment, the fax can be sent with this method without the
memory becoming full.
HEADER
Setting
OFF / ON
Select whether or not to print transmission source
information (date/time of transmission, sender’s name,
sender’s fax number, session number and page num-
ber) for the machine in the transmitted document.
" If PTT SETTING in the USER SETTING
menu is set to U.S.A, CANADA, or KOREA,
this setting cannot be changed.
To Next Page
Loading...
Need help?
General
