180 Maintenance
2 Grab the handle and lift it up slightly
to the back, and then slowly pull the
imaging cartridge out vertically.
Note
Do not touch the PC drum and the transfer belt on the imaging cartridge.
Position the removed imaging cartridge
horizontally as shown in the illustration
at the right.
Be sure to keep the imaging cartridge
horizontal and place it where it will not
become dirty.
Do not leave the imaging cartridge
removed for more than 15 minutes, and
do not place the removed imaging
cartridge in a location where it would be
exposed to direct light (such as
sunlight).
To Next Page
Loading...
