Panel Display Detail
PAPER END SELECTED TRAY No paper exists.
SELECTED TRAY IS NOT INSTALLED The selected tray is not installed.
REMOVE PAPER OUT OF DUPLEX An internal error of the duplex unit.
INSTALL CASSETTE TRAY OPEN A cassette is slid out.
Print patterns (cannot be used for print quality checking)
0 and 8 to 15: Each prints a blank page.
Pattern 0 Pattern 1 Pattern 2 Pattern 3
Pattern 4 Pattern 5 Pattern 6 Pattern 7
Note: Solid black print (pattern 7) is included in the local printing function.
An offset occurs when it is output at 100% in each color. To prevent this,
the number of the colors to print concurrently to produce solid print copies
of the No. 7 needs to be limited not more than two by making print color
settings as instructed in step 3
The following message appears during printing:
P: Number of test print pages
W: Wait time
The displays are switched by pressing [2].
29
To Next Page
Loading...
