Oki MC561 - Frame-Assy-FB

44473001TH Rev.1
108 /
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
4.2.7.15 Frame-assy-FB
(1) Remove the four screws (black)
①
, remove the screw (silver)
②
.
(2) Take off two parts (Plate-FG-SU
③
/ Plate-FG-FAX
④
)
(3
) Remove the cover-SU
⑤
.
(4
) Remove the two screws (silver)
⑥
, remove the plate-shield-FAX
⑦
.
(5
) Remove the all FAX-board cables.
(6) Remove the three screws (silver)
⑧
and remove the FAX-board
⑨
.
(7
) Remove the screw (black)
⑩
, remove the two screws (silver)
⑪
.
(8
) And remove the clamp-cable
⑫
.
(9
) Remove the plate-FAX-board
⑬
.
(1
0) Remove the four screws (silver)
⑭
and remove the plate-shield-SU
⑮
.
(1
1) Remove the all SU-board cable (
⑯
etc).
(1
2) Remove the four screws (silver)
⑰
and remove the SU-board
⑱
.
(1
3) Remove the two screws (black)
⑲
.
(1
4) Remove the plate-SU-board
⑳
.
(1
5) Pull core x2
㉑
(SSC-40-12 (1051073C4002)) out of FFC cable.
(1
6) Remove the FFC cable (20706FWR1.0L-30-105)
㉒
.
(1
7) Remove the four screws (black)
㉓
.
(1
8) Remove the cover-hinge (L)
㉔
.
(19) And remove the plate-hinge-L (caulking)
㉕
.
(2
0) Remove the seven screws (black)
㉖
.
(2
1) Remove the four cam-hinge
㉗
.
(2
2) Remove the two screws (black)
㉘
.
(2
3) Remove the cover-assy-LF
㉙
.
(2
4) Remove the four screws (black)
㉚ and
take out a FFC-cable
(20706ASFBNCD0550-642)
㉛
wrapped in film-FFC
㉜
.
(2
5) Pull out FFC-cable (20706FWR1.0-16-320)
㉝
from frame-bottom.