44473001TH Rev.1
17 /
Oki Data CONFIDENTIAL
1. CONFIGURATION
Item Setting Description
Color/Mono Color/Mono Hard Key Selects Color Copy/Mono Copy
Document type
Text/Photo,
Text,
Photo,
Glossy Photo
Allows the user to select the type of
images on the document and optimizes the
image quality for the image to be scanned
according to the selected type.
With "Background Removal/Show-through
Cancellation” selected, their levels can be
adjusted.
Resolution
Normal, High Quality
Background
Remove
OFF, 1 ~ 3 ~ 6 Blocks out the color background of the
image (assuming document has a color
background) so that the background color
is not printed.
Density
-3 (Light) ~ 0 ~ + 3 (Dark) Adjusts the darkness of images.
Contrast
-3 (Low) ~ 0 ~ +3 (High) Adjusts the difference between the light and
dark areas of an image.
Saturation
-3 (Low) ~ 0 ~ +3 (High) Adjusts the sharpness of an image.
Adjusts on seven levels: -3(Lowest) ~ 0 ~
+3(Highest).
Hue Adjustment
-3 (Red) ~ 0 ~ +3 (Green) Adjusts the balance between Red and
Green with Yellow in the middle on 7 levels:
-3(Red) ~ 0 ~ +3(Green).
RGB
Adjustment
RGB per color
-3 (Low) ~ 0 ~ +3 (High)
Adjusts the contrast among Red/Green/
Blue.
Copy Image Adjustments
Items FX750 Supplement
Document Type Text, Text/Photo,
Photo, Glossy Photo
Allows the user to select the type of
images on the document and optimizes
the image quality for the image to be
scanned according to the selected type.
Background Removal OFF, 1, 2, 3, 4, 5, 6 Blocks out the color background of the
image (assuming document has a color
background) so that the background color
would not be printed.
Density -3, -2, -1, 0, +1, +2,
+3
Adjusts the darkness of images.
Enables individual RGB adjustments.
Resolution Color 75, 100, 150, 200,
300, 400, 600dpi
The resolution in which a document is
scanned is selected.
(400/600 can be set only for FB)
Mono (Grayscale) 75, 100, 150, 200,
300, 400, 600dpi
Mono (2 levels) 75, 100, 150, 200,
300, 400, 600dpi
Scan size (Document Size) A4, Letter, Legal14,
Legal13, Legal13.5,
Executive, A6, A5,
B5
Default Size is browsed, and if it is A4,
AB-based sizes are placed higher in the
operator panel display and if it is Letter,
Letter-based sizes are.
Duplex Scan OFF, Long Edge
Binding, Short Edge
Binding
Scans the images on front and back sides
by launching Scan once.
Job Build Scanning ON, OFF Allows constructing a single scan job
from multiple individual images on the
documents.
Edge
Erase
Settings ON, OFF Allows blocking out the peripheral area of
the document (erasing the areas where
spurious shadows and borders may
occur).
Width 5 ~ 50mm (in 1mm)
0.2 ~ 2.0 inch (In 0.1
inch)
[Not supported if Scan jobs are from PC
via TWAIN]
ScanTo Common Specification