- 105 -
3. Basic Operations
3
Close the ADF cover.
4
Set a document face up in the ADF.
If [Direction] is set to [Landscape], set the document so that its left edge is pulled into
the ADF first.
If [Direction] is set to [Portrait], set the document so that its top edge is pulled into the
ADF first.
5
Align the document guide to the document width.
• If document feed problems often occur when documents are sent from the ADF, reduce the number of
document pages to set.
• Documents of up to 50 sheets (80 g/m
2
) and 5 mm high can be loaded regardless of the size.
• If documents to be set on the ADF are curled, adjust the document guides to fit the document width.
To Next Page
Loading...
Need help?
General
