Operation > 108
F
UNCTIONS
COMMON
TO
COPY
,
FAX
AND
SCAN
OPERATIONS
C
ONTINUOUS
SCAN
MODE
If you need to scan, copy or fax multiple sets of documents from the ADF or document
glass, enable the “Cont. Scan” option.
To set the fax to continuous scan:
1. Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2. Press the Fax button on the control panel to prompt the Fax Ready screen.
3. Press the Others button.
4. Press the Cont. Scan button.
5. Select ON and press Enter.
6. Press Close to exit the menu and return to the Fax Ready screen.
7. Using the touch screen, set your send properties as required.
8. Press Mono to start scanning the first document.
Once the current scanning operation is complete, the screen will display “Set next
document”. If you have further documents to scan press the Scan next page button
to continue scanning or press the Start sending button to start sending the fax.
NOTE
The example below uses the fax feature, however, the scan and copy features
follow the same process.
To Next Page
Loading...
Need help?
Printing Specifications
Weight and Dimensions
