Oki MC860 User Manual

Getting started > 18
I NSTALLING DRIVERS AND UTILITIES
Your machine is supplied with the following drivers:
> TWAIN driver (only use when connecting to the MFP via USB)
> Printer driver: PCL5c, PCL 6, PostScript3
> Fax driver
T WAIN AND PRINTER DRIVERS
The TWAIN driver is used for “Pull Scanning”, i.e. initiating a scan from your computer via
software. Compare this to “Push Scanning” where you start the scan by pressing a button
on the MFP's front panel. The TWAIN driver only works via USB connections. This means
it's not possible to control the scanner over the network from your computer.
There are two different ways of installing the TWAIN and printer drivers:
1. Plugging the printer in first and performing a “Plug and play” type of installation. In
this case you must install the TWAIN driver first.
2. Not plugging the printer in yet, but running the Oki driver installer program from the
DVD-ROM. This installs the TWAIN (scanner printer driver) and printer drivers. Once
the printer is switched on and plugged in, the installation is complete.
Plug and play installation
The MFP is a “dual device” - Windows sees it as a scanner and a printer. This means when
the MFP is plugged into a PC using a USB cable, you'll be prompted to install two different
drivers; the TWAIN (scanner printer) driver first and then the printer driver.
1. Attach the printer to a USB port of your computer.
2. Switch on the Printer.
3. Insert the Drivers & Utilities DVD.
If the DVD autoboots, cancel the dialogue.
The ‘New Hardware Found' dialogue will display.
NOTE
Mac OS X uses the PostScript3 driver only.
NOTE
You must be logged on as an administrator or a member of the Administrators
group in order to complete this procedure. If your computer is connected to a
network, network policy settings may also prevent you from completing this
procedure.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb