EasyManuals Logo

Oki MC860 User Manual

Oki MC860
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Getting started > 23
M
ULTI
PURPOSE
TRAY
The multi purpose tray can handle the same media sizes as the cassette trays but in
weights up to 200g/m² (Ultra heavy). For very heavy paper stock, use the face up (rear)
paper stacker. This ensures that the paper path through the MFP is almost straight.
The multi purpose tray can feed paper widths as small as 100mm and lengths up to
1200mm (banner printing).
For paper lengths exceeding 431.8mm use paper stock up to 128g/m² and the face up
(rear) paper stacker.
Use the multi purpose tray for printing on envelopes and transparencies. Up to 50 sheets
of transparencies or 10 envelopes can be loaded at one time, subject to a maximum
stacking depth of 10mm.
Watermarked, headed paper or transparencies should be loaded print side up and top edge
into the MFP. Do not use the duplex (two-sided printing) function.
F
ACE
DOWN
STACKER
The face down stacker on the top of the MFP can hold up to 250 sheets of 80g/m² standard
paper and can handle paper stocks up to 176g/m². Pages printed in reading order (page 1
first) will be sorted in reading order (last page on top, facing down).
F
ACE
UP
STACKER
The face up stacker at the rear of the MFP should be opened and the tray extension pulled
out when required for use. In this condition paper will exit via this path, regardless of driver
settings.
The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle
stocks up to 200g/m².
Always use this stacker and the multi purpose feeder for paper stocks heavier than
176g/m².
D
UPLEX
UNIT
The duplex unit provides automatic two-sided printing on the same range of paper sizes as
tray 2 (i.e. all cassette sizes except A6), using paper stocks from 64-105g/m².

Table of Contents

Other manuals for Oki MC860

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MC860 and is the answer not in the manual?

Oki MC860 Specifications

Printing Specifications IconPrinting Specifications
print speed color26 ppm
print speed black & white33 ppm
time to first page color10 seconds
time to first page black & white9.5 seconds
print resolution1200 x 600 dpi
processor500 MHz PowerPC CPU
duty cycle75, 000 prints per month
Copying Specifications IconCopying Specifications
copy speed color26 cpm
copy speed black & white33 cpm
first copy out color14.5 seconds
first copy out black & white13 seconds
copy resolution600 x 600 dpi
Scanning Specifications IconScanning Specifications
scan typeColor and black & white
max scan area11" x 17"
scan speed black & white33 spm
scan speed color26 spm
scan resolution600 dpi
Fax Specifications IconFax Specifications
fax modem33.6 Kbps Super G3
transmission speed2 seconds/page
fax resolution600 x 600 dpi
speed dial locations500 locations
broadcast transmission locations530 locations
Power and Acoustic Noise IconPower and Acoustic Noise
power consumption peak1, 300W
power consumption standby160W Avg.
power save mode≤25W
acoustic noise operating54dB
acoustic noise standby≤37dB
System Memory IconSystem Memory
standard imaging RAM512 MB
max imaging RAM768 MB
hard disk drive40 GB
Weight and Dimensions IconWeight and Dimensions
1-tray configuration dimensions22.2" x 25.9" x 26.3"
2-tray configuration dimensions33.3" x 30.2" x 44.5"
weight 1-tray configuration149.9 lb
weight 2-tray configuration200.6 lb
weight 3-tray configuration211.6 lb

Related product manuals