Oki MC860 User Manual

Operation > 109
J OB P ROGRAMS
If you have a routine copy, fax or scan job that you perform on a regular basis, you can
program the steps into your MFP and create a “short cut” allowing you to perform the steps
at the touch of a button. You can create six short cuts using the Job Program function.
Creating:
To register a short cut:
1. Press the Job Program button on the control panel to prompt the Job Programs
screen.
2. Select a job number you wish to associate to your program.
3. Select Yes to continue, or No to exit without saving.
4. Key in the steps you wish to program; for example if you wish to program a copy job
that is double-sided, A4(SEF) scan size and the output is 20 copies:
(a) Press the Copy button on the control panel.
(b) Press the Others button on-screen.
(c) Press the DuplexCopy button on-screen.
(d) Press the 1->2 sides button on-screen.
(e) Press the Enter button on-screen.
(f) Press the Scan Size button on-screen.
(g) Press the A4(SEF) button on-screen.
(h) Press the Enter button on-screen.
(i) Press the Close button on-screen.
(j) Using the numerical keypad, type in 20.
5. Press the Job Programs button on the control panel.
6. Using the on-screen keypad type in an appropriate title for the program.
7. Press the Enter button on-screen to complete the registration.
NOTE
Maximum of 60 steps per program; selecting or pressing a button counts as
one step.
It is a good idea to write down the steps to be performed beforehand as every
keystroke/button press is programmed.
NOTE
You cannot edit the steps within a program, if you wish to change them then
you must reprogram the job number.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb