Oki MC860 User Manual

Installing upgrades > 132
I NSTALLING UPGRADES
This section explains how to install optional equipment into your MFP. This includes:
> additional RAM memory
> paper tray(s) and storage cabinet assembly
O RDER CODES
M EMORY UPGRADE
This section explains how to install additional RAM memory into your MFP as a memory
upgrade.
The model comes equipped with 512MB (256MB + 256MB) of main memory. This can be
upgraded with an additional memory board containing 512MB, giving a total memory
capacity of 768MB maximum.
1. Switch the MFP off and disconnect the power cable.
2. Pull open the access panel on the side of the machine.
3. Carefully remove the new memory board from its wrapping. Try to handle the board
only by its short edges, avoiding contact with any metal parts as far as possible. In
particular, avoid touching the edge connector.
Notice that the memory board has a small cutout in the edge connector, which is
closer to one end than the other.
4. Identify the RAM expansion slot in the machine.
OPTION ORDER CODE
RAM memory; 512Mb 01182902
Configuration A (Model No. N34234A):
One paper tray and tall storage cabinet
44020403
Configuration B (Model No. N34235A):
Two paper trays and short storage cabinet
44020503
NOTE
The maximum capacity of your machine is 768MB, therefore the existing
256MB board must be removed from the RAM expansion slot before the new
memory upgrade board can be fitted.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb