Oki MC860 User Manual

Operation > 70
O PERATION
With its intuitive control panel, this Multi Function Product (MFP) is designed to be easy to
use. After the machine has been configured, operating is quite straight forward.
The following sections describe how to copy, fax, and scan your documents.
For full details of how to use your machine and any optional accessories to print jobs
efficiently and effectively, please refer to the Printing Guide and the Barcode Printing Guide.
For full details of how to access and use the security features, please refer to the Security
Guide.
L OADING DOCUMENT ( S )
This MFP can scan/copy/send/fax document(s) either in the ADF (Automatic Document
Feeder) or on the glass. If you need to send multiple pages, load your papers in the ADF
or enable the continue scan feature and set your documents on the glass (refer to
“Continuous scan mode” on page 108 for details).
The ADF can handle up to 50 sheets of A4 paper or 25 sheets of A3 paper, of weight
42 - 128 g/m2 at one time. The ADF can handle media up to 900mm in length (operator
assistance required).
If you need to scan/copy/send/fax pages from books, newspaper clippings, or paper with
wrinkles or curls, place them on the glass.
P LACING DOCUMENT ( S ) IN THE ADF
Before using the ADF, please make sure that your paper meets the following specifications:
> Document(s) should be square or rectangular and in good condition (not fragile or
worn).
> Document(s) should be free of curl, wrinkle, tears, wet ink, or punch holes.
> Document(s) should be free of staples, paper clips, paper sticky notes.
> Keep the glass clean and without any documents left on it.
1. If you have multiple pages, fan the pages to avoid paper jams. The ADF holds up to
50 pages at one time.
NOTE
If an access control screen is displayed on the touch screen panel, enter your
login details to display the default Copy screen. Refer to “Access control” on
page 69 for details.
NOTE
To transmit irregular types of document(s), place the document(s) on the
glass or make a copy first and then transmit the copy instead.
1
2
3

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb