EasyManuals Logo

Oki MC860 User Manual

Oki MC860
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
Maintenance > 123
5. Lift each of the image drum units out of the MFP and place them in a safe place away
from direct sources of heat and light.
6. Locate the two fasteners (1) at each side of the belt and the lifting bar (b) at the
front end.
7. Turn the two fasteners 90° to the left. This will release the belt from the MFP
chassis.
8. Pull the lifting bar (2) upwards so that belt tilts up towards the front, and withdraw
the belt unit from the MFP.
CAUTION!
The green image drum surface at the base of each cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. If the drum unit needs
to be out of the MFP for longer than this, please wrap the cartridge
inside a black plastic bag to keep it away from light. Never expose
the drum to direct sunlight or very bright room lighting.
1
1
2

Table of Contents

Other manuals for Oki MC860

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MC860 and is the answer not in the manual?

Oki MC860 Specifications

Printing Specifications IconPrinting Specifications
print speed color26 ppm
print speed black & white33 ppm
time to first page color10 seconds
time to first page black & white9.5 seconds
print resolution1200 x 600 dpi
processor500 MHz PowerPC CPU
duty cycle75, 000 prints per month
Copying Specifications IconCopying Specifications
copy speed color26 cpm
copy speed black & white33 cpm
first copy out color14.5 seconds
first copy out black & white13 seconds
copy resolution600 x 600 dpi
Scanning Specifications IconScanning Specifications
scan typeColor and black & white
max scan area11" x 17"
scan speed black & white33 spm
scan speed color26 spm
scan resolution600 dpi
Fax Specifications IconFax Specifications
fax modem33.6 Kbps Super G3
transmission speed2 seconds/page
fax resolution600 x 600 dpi
speed dial locations500 locations
broadcast transmission locations530 locations
Power and Acoustic Noise IconPower and Acoustic Noise
power consumption peak1, 300W
power consumption standby160W Avg.
power save mode≤25W
acoustic noise operating54dB
acoustic noise standby≤37dB
System Memory IconSystem Memory
standard imaging RAM512 MB
max imaging RAM768 MB
hard disk drive40 GB
Weight and Dimensions IconWeight and Dimensions
1-tray configuration dimensions22.2" x 25.9" x 26.3"
2-tray configuration dimensions33.3" x 30.2" x 44.5"
weight 1-tray configuration149.9 lb
weight 2-tray configuration200.6 lb
weight 3-tray configuration211.6 lb

Related product manuals