Configuring your machine... > 33
Paper Setup
NOTE
Within the Media Type menu, do not use the Recycled setting. If you are
loading recycled media choose the Plain setting.
FEATURE OPTION DESCRIPTION
Tray n
(where n
identifies
the tray)
Paper Size Cassette Size, Custom Sets paper in Tray n.
Custom Tray 1:
Width:
105~210~297mm
Length:
148~297~431mm
Tray 2 and 3:
Width:
148~210~297mm
Length:
182~297~431mm
Enter paper width and length.
Note: Only available if Paper
Size is set to Custom.
Media Type Tray 1:
Plain, Letter Head,
Bond, Recycled, Rough,
Glossy
Tray 2 and 3:
Plain, Letter Head,
Bond, Recycled,
CardStock, Rough,
Glossy
Select the type of media loaded
in this tray. This will help the
MFP to adjust its internal
operating parameters, such as
engine speed and fusing
temperature, to better
accommodate the media to be
fed. For example, letterhead
may benefit from a slightly
lower fusing temperature to
ensure that its ink does not
offset.
Note: Do not use the Recycled
setting. If you are loading
recycled media choose the Plain
setting.
Note: Copying and fax
reception will only occur when
the selected tray (or one of the
trays when Tray Selection is set
to “Auto”) is defined as
containing PLAIN media type.
Media Weight Tray 1:
Light, Medium, Heavy
Tray 2 and 3:
Light, Medium, Heavy,
Ultra Heavy
Adjusts the MFP for the weight
of paper stock loaded in this
tray.