Configuring your machine... > 43
Scanner
Setup
(cont.)
Default
Settings
(cont.)
EdgeErase OFF, ON Adjust the width settings using the
arrow buttons.
Input range: 05-50mm
EraseCentr OFF, ON Adjust the width settings using the
arrow buttons.
Input range: 01-50mm
Contrast -3, -2, -1, 0, +1, +2,
+3
Adjust contrast setting.
High: Enhance brightness
Low: Reduce brightness
Hue [R] -3, -2, -1, 0, +1,
+2, +3 [G]
Adjust R/G balance settings.
[G]: Enhance green
[R]: Enhance red
Saturation [Low] -3, -2, -1, 0,
+1, +2, +3 [High]
Adjust saturation setting.
High: Enhance image sharpness
Low: Reduce hue
RGB [R] -3, -2,
-1, 0, +1, +2, +3
[G] -3, -2,
-1, 0, +1, +2, +3
[B] -3, -2,
-1, 0, +1, +2, +3
Adjust RGB contrast settings.
E-mail
Setup
File Name User defined Use the on-screen keyboard to
enter a file name.
Template Edit Subject Enter standard e-mail subject text.
Max. 80 characters.
You can create up to 5 different e-
mail templates
Edit Body Enter standard e-mail body text.
Max. 256 characters.
You can create up to 5 different e-
mail templates
From/Reply To From Enter the e-mail sender address.
Max. 80 characters.
Reply to Enter the e-mail reply address (for
error notification).
Check broadcast
dest.
OFF, ON If enabled, an e-mail address
confirmation screen displays
before sending the e-mail.
USB
Memory
Setup
File Name User defined Use the on-screen keyboard to
enter a file name.
Max. 64 characters.
FEATURE OPTION DESCRIPTION
To Next Page
Loading...
