Oki MC860 User Manual

Configuring your machine... > 46
Print Setup
(cont.)
Print Menu
(cont.)
Print Setup
(cont.)
Width:
064~210~297 mm
Selects the width of the paper
defined by the “Custom” settings.
Length:
0105~0297~1200
mm
Selects the length of the paper
defined by the “Custom” settings.
Note that media of up to 1200mm
in length can be fed from the multi
purpose tray for banner printing.
Printer Adjust Manual Timeout:
Disable, 30 seconds,
60 seconds
Specifies how many seconds the
machine will wait for paper to be
fed before cancelling the job.
Wait Timeout:
Disable, 5, 10, 20,
30, 40 seconds, 50,
60, 90, 120, 150,
180, 210, 240, 270,
300 seconds
Specifies how many seconds the
machine will wait when received
data pauses before forcing a page
eject. In PostScript Emulation
mode the job will be cancelled if
timeout occurs.
Low Toner:
Stop, Continue
Specifies whether the machine
should continue printing even after
a low toner condition is detected.
Jam Recovery:
Disable, Enable
Specifies whether the machine
should perform jam recovery after
a paper jam occurred. If enabled,
the printer will attempt to re-print
any pages lost due to a paper jam
once the jam has been cleared.
Paper Black Setting:
-2, -1, 0, +1, +2
Used for micro adjustment when
very visible faded print results or
light specks (or streaks) result
when printing in Plain Paper/Black
setting.
Decrease the value if light specks
(or streaks) or snow flake like
printing results in high density
print areas.
Paper Color Setting:
-2, -1, 0, +1, +2
Used for micro adjustment when
very visible faded print results or
light specks (or streaks) result
when printing in Plain Paper/Color
setting.
Decrease the value if light specks
(or streaks) or snow flake like
printing results in high density
print areas.
Trns p r B la c k Se t t i n g :
-2, -1, 0, +1, +2
As for Paper Black Setting above.
Trnspr Color Setting:
-2, -1, 0, +1, +2
As for Paper Color Setting above.
SMR Setting:
-3, -2, -1, 0, +1, +2,
+3
To correct variations in print
results caused by temperature/
humidity conditions and difference
in print density/frequency.
Change the setting when print
quality is uneven.
FEATURE OPTION DESCRIPTION

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb