Oki MC860 User Manual

Configuring your machine... > 49
Print Setup
(cont.)
Color Menu
(cont.)
UCR Low, Medium, High Selects the limitation of the toner
layer thickness.
If paper curl occurs in dark
printing, selecting Medium or Low
sometimes helps reduce curl.
CMY100%
Density
Disable, Enable When enabled, black areas are
produced using 100% C, M, and Y
instead of black. This results in a
glossier finish.
CMYK
Conversion
OFF, ON Setting to OFF will simplify the
conversion process of CMYK data,
which will reduce process time.
This setting is ignored when Ink
Simulation function is used.
Sys Config
Menu
Personality Auto Emulation,
PCL, IBM PPR, EPSON
FX, PS3 Emulation
This item selects which industry
standard emulation your MFP
should use. When set to Auto,
incoming data is examined and the
correct emulation is automatically
selected each time a print job is
received.
Alarm release Manual, Auto When Manual, non-critical
warnings, such as requests for a
different paper size, can be
cleared by pressing the RESET
button. When set to Auto, they are
cleared when the print job
resumes.
Auto Continue OFF, ON Determines whether or not the
MFP will automatically recover
from a memory overflow
condition.
Error Report OFF, ON If ON, the MFP will print error
details when a PostScript
emulation error occurs.
PCL Setup Font Source Resident Specifies the location of the PCL
default font. Normally this will be
internal unless additional fonts are
installed in the expansion POM slot
or additional fonts have been
downloaded to RAM as permanent
fonts.
Font No. 1|00~90 Sets the PCL font number.
Font Pitch 0.44~10.00~99.99
CPI
Sets the width of the PCL default
font.
Font Height 4.00~12.00~999.75
Point
Sets the height of the PCL default
font.
Symbol Set PC-8 PCL symbol set. If the font source
and number are changed to one
which does not support the
selected symbol set, this must be
changed to an available symbol set
for that font.
FEATURE OPTION DESCRIPTION

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb