Oki MC860 User Manual

Configuring your machine... > 66
6. If required, select Group No then select the group number to assign the fax number
to. Press Enter.
7. Press Enter to save the speed dial entry or press Cancel to exit without saving.
Deleting an entry from the address book
To delete an entry from the address book:
1. Press the Setup button on the control panel to prompt the Setup screen.
2. On the touch screen, press Address Book.
3. Press Speed Dial.
From here you can enter, edit, delete, sort, insert and assign group dial numbers.
4. Press the Delete button.
If you wish to delete the entry and shift the remaining entries up to remove the
“deleted entry” then press the Delete and Sort button.
5. Select the desired speed dial number.
6. At the prompt select Yes to confirm you want to delete the entry or select No to
cancel the operation.
7. Press Close (on four screens) to exit the menu.
Connecting to a PBX
Private Branch Exchanges (PBXs) are private telephone systems used to route calls
internally, for example, in a company. When dialling a telephone number, if a prefix
(access) number is required to open an outside line, the line is connected to a PBX. If this
MFP is going to be connected to a PBX, please make the following changes to enable it to
recognise the prefix digits in the telephone numbers used to obtain access to the outside
line. After dialling the prefix digits, the MFP will wait until the outside line is available
(secondary dial tone detected) before dialling the rest of the number.
1. Press the Setup button on the control panel.
2. From the touch screen, press the Admin Setup button.
3. Using the on-screen keyboard, enter the administrator password and press Enter.
4. From the touch screen, press the Fax Setup button.
5. From the touch screen, press the Other Settings button.
6. From the touch screen, press the Arrow button and navigate to page 2.
7. From the touch screen, press the PreFix button.
8. Use the on-screen arrow buttons and keypad to enter the required prefix and press
Enter.
9. Press Close (on four screens) to store the new setting and exit the menu.
NOTE
Each group can have a maximum of 500 entries.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb