Oki MC860 User Manual

Operation > 79
1Others
(cont.)
FPolling OFF, ON To turn ON, use the numeric keypad to
enter the sub-address of the remote
machine.
If required, use the numeric keypad to
enter the password of the remote
machine.
F-Code Tx OFF, ON F Code transmission is a function to
communicate using sub addresses or
passwords in accordance with the
standard of ITU-T. by creating and
registering F Code boxes you can
execute confidential communication and
notice board communication.
Use the numeric keypad to enter the
sub-address.
If required, use the numeric keypad to
enter the password of the remote
machine.
Note: up to 20 F code boxes can be
registered, Up to 30 documents can be
stored in one box.
Note: Polling and FPolling must be OFF.
Memory Tx OFF, ON Select OFF to enable real time
transmission, i.e. fax transmission
synchronisation with scanning.
Dialling
Options
user defined Use the numeric keypad to enter the fax
number. Allows you to add a prefix,
pause, tone, etc., for example if you are
dialling an “extension” number, add a
pause between destination number and
the extension number.
Press the Regist button to assign a fax
number to the speed dial list.
Auto Rx OFF, ON Your MFP is set to receive faxes
automatically, if you wish to change this
to manual receive select OFF.
Logout If access control is enabled, logout once
you are finished to avoid any
unauthorised access.
NO. FEATURE OPTION DESCRIPTION
1
2
3
4
5
6

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb