Oki MC860 User Manual

Operation > 84
(c) Press Enter.
Registering an F code Bulletin box
1. Press Bulletin Box.
(a) Enter a sub address using the numeric keypad.
(b) Press Enter.
2. Enter a box name:
(a) Press Box name.
(b) Enter a box name using the on-screen keyboard.
(c) Press Enter.
3. If required, enter a password:
(a) Press Password.
(b) Using the numeric keypad enter a password.
(c) Press Enter.
4. If required, enable receive protect:
(a) Press Rx Protect.
(b) Press ON.
(c) Press Enter.
5. If required, enable concurrent print:
(a) Press Auto Print.
(b) Press ON.
NOTE
Retain period input range is between 0 and 31 days). When 0 is set,
documents are retained for an indefinite period.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
NOTE
If using one-byte characters, up to 16 characters can be registered. If using
double-byte characters, up to 8 characters can be registered.
NOTE
> Up to 20 digits of numbers, * and # can be used for a password.
> Registering a password is optional.
> The same password can be registered in other boxes.
NOTE
When Rx Protect is set to ON, only polling transmission is available.
When Rx Protect is set to ON, Auto Print and OverWrite features are disabled.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb