Oki MC860 User Manual

Operation > 87
Receiving using a sub address (F code polling)
By entering a sub address and password, a document stored in the bulletin box of a
recipient machine can be taken out (polling).
1. Press the Fax button on the control panel to prompt the Fax Ready screen.
2. Press Others.
3. Press FPolling.
4. Using the numeric keypad, enter the sub address of the notice board.
5. Press Enter.
6. Using the numeric keypad, type in the password and press Enter.
7. Press Close to return to the standby screen.
8. Enter the fax number of the recipient machine and press the Mono Start button.
Storing documents to the notice board
1. Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2. Press the SETUP button on the control panel.
3. Press Store Doc Setting.
4. Press Store.
5. Press Bulletin Box Doc..
6. Select the F code box in which to store the document.
7. If an ID code is set, enter the number (4 digits) using the numeric keypad.
8. Select a method of storing documents:
> Over Write: replace a document in the box.
> Add: add a new document to the box.
9. Press Yes to continue or No to cancel.
NOTE
Before operating, ensure you have the necessary sub address and password
to hand.
NOTE
If there is no password specified, leave blank and press Enter.
NOTE
The numeric keypad, speed dial, address list and group can be used for
entering numbers.
NOTE
Up to 30 documents can be stored in one box.
Before operating, ensure you have registered the bulletin box in the F-Code
box.
NOTE
If 30 documents have been already stored, the message “Cannot store fax
job.” is displayed.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb