Oki ML1120 - Rear View

ML1120/ML1190 eco User’s Guide – Getting started > 11
R EAR VIEW
1. Input Tray: insert cut sheet paper for use by the printer
(one sheet at a time).
2. Power connector: connect to printer power cable.
3. Paper Guides: can be adjusted as required to locate the
left edge of cut sheet paper.
4. Pin Tractor: to load and feed continuous forms.
5. Rear Cover.
6. Serial connector: connect to serial interface cable.
7. USB connector: connect to USB interface cable.
8. Parallel connector: connect to parallel interface connector.
1
2
3
4
5
7
6