Oki ML1120 User Manual

ML1120/ML1190 eco User’s Guide – Operating instructions > 46
B UTTONS
3 ON Printer power is ON
OFF Printer power is OFF
Flashing Low power consumption mode
INDICATOR STATUS MEANING
BUTTON STATUS FUNCTION
SEL On-line Sets the printer to off-line.
Off-line Sets the printer to on-line
and disalarms the printer.
LF/FF On-line Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
Off-line Performs continuous line
feeding.
Ejects the cut sheet.
LOAD/EJECT On-line and off-line
Continuous Forms mode
Continuous form fed until
first line of next page
If the continuous form is in
position, press to retract the
form to the Pin Tractors.
(If the sprocket holes of the
last page of the form
disengage from the sprocket
pins, do not attempt to eject
the paper as a paper jam
may result.)
On-line and off-line
Cut sheet manual mode
Ejects the cut sheet
TEAR On-line
Continuous Forms mode
Delivers the continuous
form to the cut position. If
the button is pressed again
or data is received, the
original form position is
restored.
On-line
Cut sheet manual mode
Ineffective
Off-line Ineffective

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \