Oki ML1120 User Manual

ML1120/ML1190 eco User’s Guide – Paper handling > 18
P APER HANDLING
This section describes how to use cut sheet paper and continuous
forms in your printer.
L OADING CUT SHEET PAPER
1. Ensure that the printer is switched ON.
2. Ensure that the Pin Tractor covers are closed to avoid the
possibility of paper jams.
3. Ensure the Paper Type Lever (1) is set to Cut Sheet.
NOTE
If there are any continuous forms in the printer, eject them
as described in “Removing continuous forms” on page 37.
1

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \