Oki ML1120 - Ejecting Cut Sheet Paper

ML1120/ML1190 eco User’s Guide – Paper handling > 20
paper on the Input Tray (2) into the printer until it is
gripped.
E JECTING CUT SHEET PAPER
When the printer reaches the end of the cut sheet page it
automatically ejects the page. If required, add another sheet for
the printer to continue printing from where it left off.
To eject a cut sheet left in the printer, carry out the following:
1. Press the SEL button to put the printer off-line.
2. Press the LOAD/EJECT button and the paper is ejected to
the Paper Tray.
1
2
NOTE
Ensure that the paper is accurately aligned along the Paper
Guide to avoid the possibility of skew printing.
When printing an envelope, do not fold up the flap. A flap
aligned along the Paper Guide can lead to skew printing.
NOTE
Paper longer than A4 length (297 mm) may overlap and
possibly fall off the Paper Tray.