Oki ML1120 - Page 19

ML1120/ML1190 eco User’s Guide – Paper handling > 19
4. Set the left paper margin by adjusting the Paper Guide
(1). Position the edge of the Paper Guide (1) at the tip of
the Printed Line Marker arrow (2) on the Paper Tray.
5. Remove the Access Cover and set the Paper Thickness
Lever (1) to suit the paper. See “Setting the paper
thickness lever” on page 40.
6. With the printing side facing downwards and the left edge
aligned with the Paper Guide (1), carefully insert the
1
2
1
CAUTION!
If the Paper Thickness Lever setting does not match
the paper being used, paper feeding and printing may
not work properly.