Oki ML1120 - Changing Print Modes

ML1120/ML1190 eco User’s Guide – Operating instructions > 48
C HANGE PRINT MODE
You can change print modes directly from the front panel. Hold
down the SEL button and press the button indicated below. The
printer will cycle through the choices as indicated by the two
STATUS lights. When you reease the buttons the selection is set.
ML1120 ECO
NOTE
During normal operation, the status lights show the font
selection.
SEL ALARM
SEL
LF/FF LOAD/EJECT TEAR
STATUS
FONT PITCH
SPEED
1
2
SWITCH
COMBINATION
PRINTING
STYLE
STATUS LIGHT
SEL + LF/FF Left Right
Font
Near Letter
Quality
On
Utility On
High Speed
Draft
Flashing
Super Speed
Draft
Flashing