Oki ML1120 User Manual

ML1120/ML1190 eco User’s Guide – Paper handling > 36
T EARING OFF CONTINUOUS FORMS
1. With the SEL indicator illuminated, press and hold the LF/
FF button to move the continuous form to the next page.
2. Press TEAR to align the tear-off perforations on the form
with the paper cutter on the printer.
3. Carefully tear off the forms along the tear-off perforations
using the paper cutter as a guide. Using excessive force
may result in tearing at a position other than the tear-off
perforations.
4. Press the TEAR button to reposition the continuous forms
in the printer back to the first line print position.
A LIGNING THE TEAR - OFF PERFORATIONS
If the tear-off perforations are not aligned with the paper cutter,
align them as follows:
1. Remove the Access Cover of your printer.
2. With the SEL indicator illuminated, press and hold the
TEAR button to move the tear-off perforations to the
paper cutter.

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \