Oki ML1120 User Manual

ML1120/ML1190 eco User’s Guide – Paper handling > 25
pushing gently forward until the Input Tray clips into
place.
10. Replace the Access Cover.
11. Press the LOAD/EJECT button. The continuous forms will
be taken into the printer and positioned at the first line
print position.
F EEDING CONTINUOUS FORMS ( BOTTOM FEED )
Moving tractor assembly
1. Ensure that the printer is switched OFF.
NOTE
If there is a cut sheet in the printer, eject it as described in
“Ejecting cut sheet paper” on page 20.

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \